... Skip to main content

Newon Star Lights

Plaster-In LED Aluminium Profile

Embed heavy-duty structural linear lighting into brick, blockwork, and rendered walls with the Plaster-In LED Aluminium Profile by Newon Star Lights. Engineered specifically for pre-plaster structural wall phases, this robust channel handles thick masonry plaster, concrete slotting, and tile-in installations.

Featuring heavy-gauge aluminium housing and deep side anchor tracks, it locks securely into raw cement walls before final plaster skimming coats are applied across residential and commercial builds in Islamabad.

Structural masonry housingDesigned for raw brickwork, concrete grooves, and rendered cement walls.
Tile-in compatibilityMounts flush alongside ceramic, porcelain, or stone wall tiles.
Heavy thermal dissipationThick aluminium body safely cools high-wattage commercial LED tape.
Message us on WhatsApp for technical specs, stock status, and project quotes.
Chat on WhatsApp
Category:

Description

Quick answer: The Plaster-In LED Aluminium Profile is a heavy-duty channel for brick, blockwork and rendered walls, installed before plaster skimming or wall tiling. It takes LED strips up to 18-20 mm wide, needs a slot depth of 14.5 to 56.8 mm, and comes with a semi-clear or opal PC diffuser. Message us your wall depth and we will confirm the right size.

Total width46.8 to 85.5 mm
Strip width18 to 20 mm
Slot depth14.5 to 56.8 mm
CoverSemi-clear or opal PC

Structural Masonry Lighting with Plaster-In LED Channels

While drywall systems use delicate trimless channels, solid masonry walls require a heavy-duty plaster-in LED aluminium profile. Designed for concrete wall slots, brick masonry grooves, and wet plaster rendering, this channel integrates lighting directly into building structures.

Electricians and masonry contractors in Islamabad install this track during rough-in construction phases before final wall skimming or wall tiling.

Main Advantages of Masonry Plaster-In Profiles

Deep Plaster Anchor Tracks

Heavy exterior grooves key into thick cement render, gypsum plaster coats, and tile adhesive.

Flush Tile & Render Alignment

Works as an edge guide for wall tiles or wet plaster skimming, so the wall surface stays flat.

Rugged Heavy-Gauge Build

Thick anodised aluminium walls resist crushing from wet mortar and trowel work on site.

Where to Install Masonry Plaster-In Channels

Surface Typical use
Solid concrete & brick walls Embedded hallway accent lines and staircase wall slots
Tiled bathrooms & kitchens Tile-in niche lighting and shower wall linear accents
Exterior rendered walls Covered entryways, lobbies and porch columns

Working on thin drywall instead of masonry? Take a look at the Trimless LED Aluminium Profile, or compare every channel on the LED aluminium profiles page.

Technical Specifications & Cut-Out Dimensions

Parameter Specification
Product type Plaster-in LED aluminium profile
Total width 46.8 mm – 85.5 mm
Visible light strip width 15.0 mm – 20.0 mm
Required slot depth 14.5 mm – 56.8 mm (deep render)
Max strip width Fits up to 18 mm – 20 mm LED strip
Cover type Heavy semi-clear or opal PC diffuser
Housing Heavy-gauge anodised aluminium
Suitable for Brick, blockwork, concrete and rendered walls, tiled bathrooms and kitchens

Buy Plaster-In LED Aluminium Profiles from Newon Star Lights

Integrate lighting directly into structural walls and tiled surfaces with a commercial-grade channel built for masonry installations.

Channel sizing

Share your wall depth and we confirm the right slot and channel size.

Waterproof strip fit

Tell us the strip type and we check it suits tiled and wet areas.

Stock and pricing

Send your lengths and we confirm stock and project pricing in one chat.

Click the WhatsApp button to consult with the Islamabad technical team regarding cement wall channel sizing, waterproof strip compatibility, and project pricing for your Plaster-In LED Aluminium Profile.

Send your wall depth and strip type for expert masonry lighting advice.Get advice on WhatsApp

Frequently Asked Questions & Technical Support

How does a Plaster-In Masonry profile differ from a Trimless Drywall profile?

Trimless profiles are designed for thin drywall sheets and light joint compound. A Plaster-In LED Aluminium Profile features a deeper, heavy-gauge housing built to withstand thick wet cement plaster, concrete wall chasing, and tile adhesive installations.

Can this channel be installed in wet areas like shower niches or tiled bathrooms?

Yes. When paired with IP65/IP67 silicone-encapsulated LED strip lights and sealed diffuser end caps, this profile is suitable for tiled bathroom walls and niche accent lighting.

At what stage of construction should this profile be embedded?

It must be installed during rough-in masonry construction when brick grooves are cut and raw cement plaster or tile backing boards are being applied.

How can stock availability be confirmed for my project?

Message directly on WhatsApp with required profile lengths and wall depth dimensions for quick inventory checks and ordering assistance.